2016年2月21日星期日

Let talk about rubber fender




Fender is an elastic buffer device of rubber use of ships dock edge. Mainly used to slow the ship and dock impact, or between ships in dock impact, or mooring process impact, to prevent or eliminate damage to a ship or dock Usually the rubber fender according to the structure can be divided into two categories: solidrubber fender and floating type rubber fender.

Solid rubber fender dock ship application long history and wide range of anti-collision equipment. Can be divided according to the rubber fender force to shear, rotation and compression type and so on; according to the fender structure, solid rubber fender can be classified as type D type, Cone type, drum type, fan-shaped, rectangular type, cylinder fender and so on.

Solid rubber fender with high energy absorption and reaction force, and has low cost, long service life, easy installation and maintenance advantages, dock, dock installed more protective device.

Floating type rubber fender is newer protecting shipboard equipment, solid rubber fender relative than its main features are: large compressive deformation energy absorption, low reaction force, since floating, easy installation, etc. and for and. Due to its self-flotation characteristics especially suitable for large changes in the terminal installation in tide

Type of rubber fender: Dock Corner Rubber Fender,ME Rubber Fender,Rectangle Rubber Fender,U Rubber Fender,XT Rubber Fender,Cylinder Rubber Fender,Arc rubber fender,Cone rubber fender,D rubber fender,DD rubber fender,Drum rubber fender,Foam floating rubber fender,GD rubber fender,Pneumatic Inflatable rubber fender,roller rubber fender


1, Transport
1) protect the rubber fender of transport mode is the car.
2) fender in loading and unloading process, to take the correct lifting way shall keep clean, not throw hit, avoid hard hooks, spines, row to do harm fender.
3) The loading goods should packing strong, to ensure that the goods in the whole transport process is not shift, not loose.
4)after the goods to designated site , unloading the equipment with suitable lifting, avoid collision and damage.
2, storage
1) rubber fender protection in storage, should avoid direct sunlight, avoid rain and snow, avoid with acid, alkali, oil ,organic solvents and other substances to come in contact with; from heat source one meter away, inventory temperature maintained at - 15 to 40 degrees.
2)rubber fender storage area need about 400 square meter




没有评论:

发表评论